2021
...
Septemper 15, 2021
...
2023
...
August 20, 2021
...
December 15, 2023 - Conversion Tag
|
...
Advertiser List can now be separately filtered by the phase of the advertiser i.e. ‘testing’, ‘phase out´. You can find the filter next to the advertiser status filter.
...
Septemper 2, 2021
...
...
Status | ||||
---|---|---|---|---|
|
Partner can now copy the default tracking link directly from the Advertiser Explorer. There is just one click needed to load the link onto the clipboard.
...
September 01, 2021
...
...
Status | ||||
---|---|---|---|---|
|
It was previously not possible to upload a xml feed that had the same tag in different levels because we only used the tag name to map the value.
Now we use the whole path to the tag as its mapping-name.
The following schema can now be used without any data loss and confusion regarding the names (price vs. shipping_price)
Code Block |
---|
<item>
...
<price>10</price>
<shipping>
<price>3</price>
...
</shipping>
</item> |
...
August 16, 2021
...
...
The classical export of Advertiser on partner side has been improved. By the context of an Adspace, the export of Advertiser is now containing a complete set of data as well as a default tracking click url. This will support your Partner by implementing tracking urls.
Status | ||||
---|---|---|---|---|
|
The Advertiser Explorer has been improved by a higher performance as well as new filter for the relationship. The new filter for relationship status allows your partner to search for Advertiser still not applied or within an active relationship etc.
...
August 06, 2021
...
...
Status | ||||
---|---|---|---|---|
|
Server to server conversions themselves do not contain device information so the device id on them was always set to “desktop“ in analytic reports.
Now the device id of the most appropriate user journey touchpoint is applied on server to server conversions.
Optional you can provide the appropriate device id using a parameter called 'device_type' set to one of supported device id values: “mobile“, “tablet“, “desktop“
...
August 05, 2021
...
...
Status | ||||
---|---|---|---|---|
|
A default time for automatic confirmation of a Conversion can now be defined in commission models. This allows you to run the automatic confirmation for all Conversions except for those with a specific configuration in your Commission Model.
...
Before this update, we only displayed relationships of activated advertisers. However, with the latest update, it is now possible to filter by advertiser status or completely remove the status filter. | |||||||
October 20, 2023 - GTM / sGTM TemplatesIn this release, we’ve improved the type safety and basket functionality. You’ll appreciate seamless header forwarding by server-side templates. We've introduced a new variable template to convert a basket into i19s. All templates are now available on our i19s GitHub for a smoother and safer experience. | |||||||
October 05, 2023 - Table Styling Enhancements
|
...
We have added a CSV download which allows you to see all Conversions, Views, Clicks as well as Transaction, that you have selected for invoicing the advertiser.
...
...
Status | ||||
---|---|---|---|---|
|
We removed the adspace grid view in favor to the table view to optimize usability for partners with a large number of adspaces.
...
August 04, 2021
...
...
Status | ||||
---|---|---|---|---|
|
We had a small bug where the upload of multiple hosted creatives was no longer working as expected and only creating one creative. It is now fixed.
...
August 03, 2021
...
...
Status | ||||
---|---|---|---|---|
|
Click and View rating was not applied for traffic with deactivated Creatives.
...
August 02, 2021
...
...
Status | ||||
---|---|---|---|---|
|
We added a column called ‘period_name’ to the admin commission model export.
...
July 30, 2021
...
...
Status | ||||
---|---|---|---|---|
|
You can now manipulate parameters forwarded via Webhooks using regular expressions . For detailed information please read the documentation.
...
July 29, 2021
...
...
New menu navigation
We created a new menu-structure as well as a new navigation type:
The new structure reflects the Ingenious products and was inspired by customer feedback. We made all tools that were previously only to reach through the advertiser manager, available in the menu.
We save the last selected advertiser and make it the default whenever opening another mask where an advertiser selection is needed. You can change the advertiser by clicking on it in the breadcrumb.
Instead of two levels we now have three levels. Also the levels will not be visible all the time but instead only open up on hover and disappear again on a click to either a menu point or the grey-ish space next to it.
We prepared a more in-depth article of the changes: 28.07.2021 UI navigation makeover .
...
July 26, 2021
...
We're excited to introduce styling enhancements to tables in this release:
No action needed; these enhancements apply across all tables in the app. | |||||||
October 10, 2023 - Tracking Category FormDue to a cleanup in the tracking category formula, we have removed some unused and misleading fields. | |||||||
July 5, 2023 - Conversion Overview: CustomerId
The already provided Tracking parameter value for customerId We have also added the customerId to the Conversion Request format which allows to create and update the customerId field in Conversions. | |||||||
June 15, 2023 - domain monitoring and management
|
...
Vouchers to be used by partners for promotion of campaigns now contain tracking click links, which removes the need for your partners to create a deeplink to the landing-page manually. If a voucher does not have a dedicated landing-page, the default landing-page of the advertiser is used. Also the voucher-export now contains those tracking click links.
We are excited to introduce the new "Domains" feature in our documentation, offering a comprehensive overview and management tool for your custom domains, including tracking domains. With this feature, you can effortlessly ensure the proper functioning of your domains, check DNS settings, and track domain usage, all within a user-friendly interface. The feature includes filters for easy navigation and provides details such as creation and update dates, reachability, DNS status, usage, and domain status. You can modify the status or delete domains as needed. The tool can be found under Access > Domains Planned features that are soon to come:
| |||||||
June 13, 2023 - Traefik integrated in infrastructure
We are pleased to announce that we have integrated Traefik into our infrastructure, bolstering SSL/TLS automation capabilities. With Traefik, the process of managing SSL/TLS certificates is now automated, ensuring secure communication within the infrastructure. Traefik's integration with Let's Encrypt enables the automatic acquisition and renewal of SSL/TLS certificates, eliminating the need for manual intervention. This streamlines certificate management and guarantees that all services are consistently secured. The dynamic configuration and service discovery features of Traefik facilitate the seamless integration of new backend services, adapting to the evolving nature of Ingenious Technologies' environment. Load balancing functionality optimizes resource utilization by efficiently distributing incoming traffic across multiple instances of backend services. By adopting Traefik, Ingenious Technologies reinforces its commitment to automation and security, ensuring a reliable and secure infrastructure for its clients. | |||||||
June 8, 2023 - Get your data from Heuston Gaming into IngeniousWe're happy to provide an automated connection between the Ingenious Marketing Platform and Heuston Gaming. Registrations and commercial events are automatically imported in the Ingenious Platform and attributed to the corresponding partners by using our new import process for server side data. You are looking for further connections to bring your data into Ingenious? Give us a call. We are thrilled to bring your data into the Ingenious Marketing Platform! | |||||||
June 09, 2023 - Mobile friendly Beta UI for partners
|
...
We |
...
For further explanation and all possible parameters please read the documentation.
...
July 12, 2021
...
...
Ad-Blocker-Detector
Status | ||||
---|---|---|---|---|
|
...
July 9, 2021
...
Dashboards
Status | ||||
---|---|---|---|---|
|
Exports
Status | ||||
---|---|---|---|---|
|
...
are thrilled to announce the beta release of our new Partner UI, featuring an enhanced mobile-friendly experience. Enjoy a responsive design that seamlessly adapts to various screen sizes. You can access the new ui via the “Try the new UI“ menu point. Please note that this is a beta release, and while we have extensively tested the new mobile-friendly features, there might still be occasional glitches or minor issues. Pages in the new UI are still being migrated from the classic UI. If you can't find a page you're looking for, try the classic UI. Further, several pages and the general layout of this UI have been rebuilt in a mobile-friendly fashion. Some are still missing and are soon to come. You can switch back to the classic UI by clicking the button in the header. | |||||||
March 30, 2023 - Advertiser tracking domain prefix
|
...
Status | ||||
---|---|---|---|---|
|
...
June 29, 2021
...
...
Status | ||||
---|---|---|---|---|
|
improved support for zipped feeds
more meaningful error messages
the feed id is now visible in the feed table in the ui
we now use the user agent
Mozilla/5.0 (Windows NT 6.3; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/37.0.2049.0 Safari/537.36 (i19s.com)
when loading your feeds.
...
June 22, 2021
...
...
Status | ||||
---|---|---|---|---|
|
Now you can use tracking Preview Mode to validate all combinations of TCF parameters when TCF Setup Mode is activated for the ad space
...
June 16, 2021
...
...
Status | ||||
---|---|---|---|---|
|
Would you like to allow your platform partner to raise a request regarding conversions?
We are introducing a new feature that will allow you to do the following:
Allow your partners or other platform users to make a request concerning conversions. This will enable partners to actively intervene on conversions for the first time.
Manage the requests with the Conversion Request Explorer or use the Conversion Request Import for file uploads.
We enable both "create new conversions" and "modify existing conversions" with full access to all relevant data.
The status of a conversion request shows the current process status such as "requested", "accepted" or "processed". This provides the essential communication between requesting users and "decision makers".
Full access to the conversion to change values such as revenue, status, goal, category, auto-approval time, and any other fields of a conversion.
Read more
Please have a look to our documentation to learn more about that new feature.
A new lesson regarding to this new feature is also available in our Ingenious Learning Platform (ILP)
Status | ||||
---|---|---|---|---|
|
There is a new Export available in Conversion Overview, which allows you to change Conversions by Conversion Requests. That means, you can use all filter for Conversions in order to export these data in a format, ready for Conversion Requests.
Please read this article for more information about that.
Status | ||
---|---|---|
|
Please notice that the Conversion Export/Import will be marked as deprecated and is going to be replaced by Conversion Requests. Please read this article for more information about the differences between this classical feature and Conversion Request.
...
June 15, 2021
...
...
Status | ||||
---|---|---|---|---|
|
...
Mai 26, 2021
...
...
Exports
Status | ||||
---|---|---|---|---|
|
Status | ||||
---|---|---|---|---|
|
...
Mai 21, 2021
...
...
Exports
Status | ||||
---|---|---|---|---|
|
Status | ||||
---|---|---|---|---|
|
...
Mai 21, 2021
...
...
Status | ||||
---|---|---|---|---|
|
...
April 21, 2021
...
...
Exports
We have added some missing fields with conversion data in UI and Exports.
Status | ||||
---|---|---|---|---|
|
The Id of category and targets are now shown in conversion overview
Status | ||||
---|---|---|---|---|
|
Added columns ‘conversion_target_id’, ‘timezone’ to the Conversion Export
Added columns ‘conversion_target_id’, ‘conversion_product_category_id’, ‘timezone’, ‘status’ to the Touchpoint Export
Status | ||||
---|---|---|---|---|
|
Added column ‘total_fee’, ‘timezone’ to the Conversion Export
Added column ‘conversion_uniqid’, ‘timezone’ to the Touchpoint Export
...
April 9, 2021
...
...
Status | ||||
---|---|---|---|---|
|
You can let onpage clicks and conversions be called in Preview Mode using an internal preview cookie, which can be set manually before testing and should be removed afterwards.
All tracking requests with this cookie set are called as in Preview Mode, so you can just load the landing page to check onpage clicks, or make a test purchase to see the attribution results immediately.
...
March 25, 2021
...
...
March 16, 2021
...
Before this update, the system only permitted setting tracking domain prefixes that were at least three characters long. However, with the latest update, it is now possible to select prefixes with only one character. | |||||||
March 29, 2023 - Product Feeds caching optimisation
The Product Data Feed system until now supports regular intervals (4/8/12 times per day) for importing feeds from Advertisers. However, for certain partnership types like price comparison sites, time delay for the update time of single products in feeds is important. We are pleased to introduce a new feature to our Product Data Feed system which allows faster feed updates if the Advertiser’s system supports caching. The feature can be enabled per individual feed. You can now enable “caching optimisation” in the product feed settings if the Advertiser’s feed system supports either Please be aware that enabling this option will do nothing if your feed download does not support caching at all. | |||||||
March 23, 2023 - Get your data from Aspire Global into IngeniousWe're happy to provide a connection between the Ingenious Marketing Platform and Aspire Global. What data can I get from the Aspire Global Gaming Platform? Read more: aspireglobal.com | |||||||
March 10, 2023 - Extensions of the Data WarehouseAdded Key Account Manager ID to Partner tableWe have added the ID of the Key Account Manager to the Partners table. Now it is possible to retrieve the Key Account Managers, for example to notify them by email. We have added an example in the Knowledge Base: https://ingenioustechnologies.atlassian.net/wiki/spaces/KB/pages/3192488025/Querying#Find-email-addresses-of-key-account-managers Added Voucher Codes tableAdvertisers on the platform can provide voucher codes. We now added them to the data warehouse. The example you can find in our Knowledge Base: https://ingenioustechnologies.atlassian.net/wiki/spaces/KB/pages/3192488025/Querying#Get-Vouchers | |||||||
March 8, 2023 - Advertiser Billing: Enhanced validation
|
...
This change will improve the usage of our Endpoint get/conversion/list which allows querying for conversions in finance.
The current optional parameter withBasket for showing the basket position will be not necessary any more. The basket detail object will be part of the complete result.
Example
The withBasket-Parameter is not necessary any longer for showing the basket position
[apidomain]/finance/get/conversion/list?dateFrom=2021-01-11&dateTo=2021-01-11&page=1&rows=&withBasket=true
Invoices entries are now grouped into different buckets for Success, Invalid and Deactivatedwhich based on the new enhanced billing data check. Choose one of these three buckets to list all corresponding invoice entries in the preview step of the advertiser billing. You can easily jump to the configuration page of advertiser billing data by clicking the advertiser Id ( | |||||||
February 28, 2023 - Link to Advertiser Explorer
|
...
In some situations, we only showed the default commission model of the advertiser in the advertiser dashboard. With this release we show the correct commission model assigned to the relationship/contract between Adspace and Advertiser.
...
March 15, 2021
...
...
Status | ||||
---|---|---|---|---|
|
In the partner UI we introduced a new main menu Finance where we focus all financial process related menu points
Conversions
Billing
(direct access to billing data which was available in the user dropdown)Payment entries
(direct access to payment entries which was available in the user dropdown)
In the admin UI we moved the
Conversion Errors
menu fromReporting
toFinance
...
March 04, 2021
...
As a Partner, if you're looking for Creatives but don't have a Relationship with an Advertiser yet, simply click on the link that we just fixed and it will take you directly to our Advertiser Explorer. From there, you can easily browse and find the perfect advertiser to meet your needs to then look for Creatives for your Adspace. | |||||||
February 16, 2022 - Default Comments for Conversions
|
...
Status | ||||
---|---|---|---|---|
|
We have changed the logic for basket rating to calculate commission based on negativ amounts.
...
Status | ||||
---|---|---|---|---|
|
A conversion that was created in status ‘confirmed’ by package import could not be invoiced later. We removed this restriction.
...
March 03, 2021
...
...
Status | ||||
---|---|---|---|---|
|
in reporting and analytics we are using the complete available width of the screen
the dashboard template has a smaller selection and icons
in finance the presentation of periods for commission models is using the complete screen
a reference to docs.i19s.com is available in the footer and all other places
make product data feed mapping dialog/popup use more width of the screen
...
February 19, 2021
...
...
January 28, 2020
...
Conversion Comments We are introducing Comments for Conversions to improve the way how you can communicate to your partner. Leave a comment for status changes Especially for rejections, it make sense to describe your intention. Filter for comments | |||||||
February 06, 2022 - Problem with Filter Inputs
|
...
February 1, 2021
...
...
Status | ||||
---|---|---|---|---|
|
The new Advertiser Explorer is available on the Partner platform from now on. It will replace the old Program catalogue soon.
It makes it easier for partners to discover advertisers due to tons of new filters.
We've added attributes and performance metrics to aid in the decision-making of the partners to choose with which advertiser they want to work with.
For example you can filter by certain attributes of an advertiser: only show me advertisers that offer a product data feed and use first party tracking. And then sort to see the advertisers with the highest EPC first.
Platform administrators can enable the Advertiser Explorer for all partners in your platform configuration settings. For more information on the Explorer please read our documentation.
We fixed a problem that occured when typing “O” in filter inputs (e.g. when filter for Advertiser in Relationship Explorer) which previously cleared the input. | |||||||
January 19, 2023 - Translation of Advertiser name and description
| |||||||
The name and description of an Advertiser were always in the advertiser' language. | |||||||
January 16, 2023 - Product data Import: New error type and message
|
...
We fixed some problems with our product data feed processing:
Even though the Quoting settings was visible in the ui it was not working properly, now it does!
We now support spaces in the header cells.
For some feeds we blocked the resource we wanted to download which lead to failures, this is also fixed by now.
...
Januar 22, 2021
...
| |||||||
January 10, 2023 | |||||||
Conversion Requests: Improved by less entry barriers
|
...
Status | ||||
---|---|---|---|---|
|
It was not possible to search for conversions by using one of the additional partner sub Ids (1-6).
...
Januar 5, 2021
...
...
Status | ||||
---|---|---|---|---|
|
The relationship explorer is the first part of our new ui that we made available on both partner and agency side. The features are limited on partner side, but it still gives a good overview of your applications and existing relationships. You can enable it in your platform configuration settings. For more information on the explorer please read our documentation.
...
...
Status | ||||
---|---|---|---|---|
|
You can check any tracking URL (ad impression, click, conversion, CAD) calling it in preview mode. A preview tracking request will be processed as closely as possible to the regular one. No request processing results are stored or counted. Processing results will be sent back as a JSON object containing all input parameters and calculated values like redirecting location URL and error information.
You can call any tracking URL in preview mode just adding at the end: https://...&preview_mode=1
Raising of new requests is now easier by changing some important fields to not mandatory ones.
|
2022
Please see ℹ️ Release Notes 2022
2021
Please see ℹ️ Release Notes 2021
2020
Please see ℹ️ Release Notes 2020
2019
Please see ℹ️ Release Notes 2019
...
Table of Contents | ||||
---|---|---|---|---|
|
...